Matrix SETU VGFX Quick Start Manual page 63

Voip-gsm-fxo-fxs gateway
Hide thumbs Also See for SETU VGFX:
Table of Contents

Advertisement

http://arttel.ru
Default = '1'
Port Selection Method: Select desired port selection method in this field.
SETU VGFX will select the port to place the call as per this method. SETU
VGFX supports following two methods:
Default = Ascending
CLI number on FXS Port: This field is applicable only when group type
'FXS' is used for routing the call. (Please refer 'Number Presentation on FXS
Port' feature in the System Manual for more details)
If Destination Port Determination Method selected is 'Destination Number
Based' then click on 'FXS Port Routing: Destination Number Based' link and
program the following parameters:
Destination Number: Program frequently called numbers in this field.
Maximum Length = 24 characters
Valid digits are 0 to 9, *, # and (.) dot
Default = Blank
Minimum Length: Program minimum length of destination number, required
to be dialed by the user in this field. If the destination number dialed by the
Matrix SETU VGFX Quick Start
For Mobile Port: 1-4
Ascending
Descending
57

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SETU VGFX and is the answer not in the manual?

Table of Contents