Matrix SETU VGFX Quick Start Manual page 53

http://arttel.ru
• Destination Number: Program destination number in this field.
Maximum Length = 24 characters
Valid digits are 0 to 9, *, # and (.) dot
Default = Blank
If destination number to be dialed out is an IP Address then gateway will not check Destination
Port Determination Method. Instead it will route the call using the SIP Trunk Group programmed for
IP Dialing. (Please refer 'IP Dialing' feature in the System Manual for more details)
(Refer "Routing Mechanism on Mobile" feature in System Manual for more details)
To program Destination Number Determination Method for SIP Trunks:
Click on 'SIP Trunk Parameters2' link and select Destination Number
Determination Method for each SIP Trunk.
• SETU VGFX supports following methods for determination of destination
number on SIP Trunk.
• Destination Number Not Required
• Fixed Destination Number
• Based on Calling Number
• Based on Called Number
• Manual Dial
Default = Destination Number Not Required
Matrix SETU VGFX Quick Start 47