Matrix SETU VGFX Quick Start Manual page 44

http://arttel.ru
By default, Port number '1' is selected in Group 1 for all FXO Ports.
• Total Ports: Program total Ports to be checked while routing the call, if the first
port is found busy. You have following options:
• 1-2 for FXO Port
• 1-9 for SIP Trunk
• 1-2 for FXS Port
• 1-4 for Mobile Port
By default, it is set to 2 for all FXO Ports.
• Port Selection Method: Select the Port Selection method for routing the call to
the destination port. SETU VGFX supports following port selection methods:
Ascending and Descending. By default, it is 'Ascending' for all FXO Ports.
• Similarly program Routing Group parameters for Group 2 and Group 3 as shown
above.
When Destination Port Determination Method selected for FXO Port is 'Destination
Number Based'; program Routing Groups parameters as shown above in FXO Port
Routing: Destination Number Based table.
When Destination Port Determination Method selected for FXO Port is 'Calling Number
Based'; program Routing Groups parameters as shown above in FXO Port Routing:
Calling Number Based table.
Follow the steps given below to program the Routing Groups for SIP Trunk:
38 Matrix SETU VGFX Quick Start