Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Matrix Manuals
  4. Gateway
  5. SETU VFX88L
  6. Quick start manual

Matrix SETU VFX88L Quick Start Manual

8-port voip to fxs gateway with lifeline
Hide thumbs Also See for SETU VFX88L:

Advertisement

Quick Links

Download this manual See also: System Manual
SETU VFX88L/VFX44L
Quick Start

Advertisement

loading
Need help?

Need help?

Do you have a question about the SETU VFX88L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Matrix SETU VFX88L

Summary of Contents for Matrix SETU VFX88L

  • Page 1 SETU VFX88L/VFX44L Quick Start...
  • Page 3 SETU VFX88L/VFX44L SETU VFX88L/VFX44L SETU VFX88L/VFX44L SETU VFX88L/VFX44L SETU VFX88L/VFX44L 8-Port VoIP to FXS Gateway with Lifeline Quick Start...
  • Page 4 Thank you for choosing Matrix SETU VFX88L! This Quick Start is meant to help you to install your SETU VFX88L and do basic configurations to enable you to make and receive VoIP calls using it as easily as a normal telephone call. For detailed information on installing and configuring SETU VFX88L, please refer 'Matrix SETU VFX88L System Manual' on CD-ROM provided to you with the product.

  • Page 5: Before You Start

    Mounting Template Make sure that all the above mentioned accessories are present when you open the Sales Kit of SETU VFX88L. In case any of the part is missing or damaged, contact the vendor/ITSP/system administrator from whom you have purchased the system.
  • Page 6 Outbound Proxy Server Port Installing SETU VFX88L Precautions & Safety Instructions: Take following precautions while installing SETU VFX88L to reduce the risk of fire, electric shock and injury to the system as well as the person using it: • Do not install the system where sulfuric gases are produced and do not use the telephone to report a gas leak in the vicinity of the leak.
  • Page 7 PSTN FXO2 FXS2 FXS3 FXS1 FXO5 FXS2 FXO6 Broadband Router/Modem FXS3 FXO7 LifeLine PSTN FXS8 FXOn FXSn Port SETU VFX88L In Corporate Office SETU VFX88L Broadband FXS1 FXO1 FXS1 Modem/Router FXS2 FXO2 FXS2 FXS3 LifeLine FXS8 FXO8 Port PSTN FXOn...
  • Page 8 FXOn FXSn Connecting SETU VFX88L • Connect the Ethernet port of the SETU VFX88L to the Ethernet Port of the broadband modem/LAN switch using an Ethernet cable provided with the system. • Connect FXS ports of SETU VFX88L to the telephone instrument/FXO ports of PBX using RJ11 cables.
  • Page 9 How to reach the Home Page of Web Server? • Connecting the SETU VFX88L with the computer • Connect the Ethernet Port of the SETU VFX88L to the Ethernet Port of the Computer/LAN switch using the RJ-45 cable provided with the system. •...
  • Page 10 • Open the Web browser/Internet Explorer. • Enter the IP address of the SETU VFX88L Network Port in the URL field of the Web browser/Internet Explorer and press Enter key. • The SETU VFX88L will prompt for login as shown below: •...
  • Page 11 • Now, you can configure the SETU VFX88L using Web Jeeves. • The left most side displays the link for different web pages for configuring. • Click on the link and the respective webpage will get opened. • Make required changes and click on 'Submit' button given on the bottom of the webpage to affect the changes.
  • Page 12 Use IP Address fetched using STUN • Use Router's Public IP Address • By default, 'Use Network Port IP Address' is programmed. • Program this parameter if Peer-to-Peer application is to be used and SETU VFX88L is connected behind the NAT.
  • Page 13 • Symmetric RTP flag: • Program this feature, if you want to make Peer-to-Peer application and you are using Public IP Address. • By default, flag is disabled. • Enable the flag, if Symmetric RTP logic is to be used. •...
  • Page 14 • Send CLI: • Feature allows you to restrict the CLI while making a call through SIP Account. • By default, Send CLI flag is enabled for all SIP Accounts • Disable the flag if CLI is to be restricted. •...
  • Page 15 CLI on FXS port. • For "Called Number Based" Routing type: • Program the Called Number based Routing table and refer topic "Configuring the Called Number Based Routing Table". Configuring the FXS Port Parameters • Click on the link 'FXS Port Parameters' and webpage will open as given below: •...
  • Page 16 Flash timer value should be greater than or equal to the Flash timer of the telephone instrument connected or the Flash timer of FXO port to which it is connected (in case of SETU VFX88L is connected to any PBX).
  • Page 17 • Open Loop Disconnect • By default, Disconnect Signaling is programmed as Battery Reversal. • If Disconnect Signaling is required as Open Loop Disconnect, program the Open Loop Disconnect Timer also. By default, Open Loop Disconnect timer is programmed as 500 msec. Range of this timer is 001-999 msec.
  • Page 18 • Dialed Number Based Routing Table is required to program only if Routing type for any FXS port is programmed as 'Dialed Number Based'. • Click on the link 'Dialed Number Based Routing' and webpage will open as given below: •...
  • Page 19 • By default, all Number string and Destination address is blank. Destination Port is 5060. • Program the desired number/prefix in Number field and corresponding destination address & port for this number/prefix. Configuring the Called Number Based Routing Table • Called Number based routing table allows system to placed the incoming SIP call to desired user directly.
  • Page 20 • By default, Called number string is blank and FXS port routing group viz.1 is assigned to all indices. • Program the desired number/prefix to be placed on the particular FXS port routing group assigned to it. • By default, CLI Number on FXS port is programmed as Received Calling Party.
  • Page 21 • Connection Type: • Program the Connection type for the Network Port from the following: • DHCP • PPPoE • Static IP • By default, Static IP is programmed. • Select 'DHCP', if you want IP address, Subnet mask and Gateway address to be assigned by DHCP server automatically.
  • Page 22 You may use following STUN server address and STUN server port: Address: stun.kcip.com or stun.fwdnet.net Port: 3478 • After Submitting this page, SETU VFX88L will restart and you will be logout from webjeeves. • If SETU VFX88L is connected directly to the computer for configuring the SETU VFX88L, remove the Ethernet cable connected to Computer and connect it to the Broadband modem/LAN switch.
  • Page 23 'Switching ON the SETU VFX88L' topic) Step 3: Making a Test Calls Making a call from FXS to SIP Account • Lift the handset of the phone connected to the FXS port of SETU VFX88L. • Dial Number. • Talk.
  • Page 24 Yes. You can change the IP address and subnet mask of Network port of SETU VFX88L if you do not have PC to access Web Jeeves. You need to issue commands from any of the FXS port to change the IP address and subnet mask.
  • Page 25 Q.10. I have connected my PC to Network port of SETU VFX88L. But, I am not able to access the Web Jeeves for configuration. Ans. Please ensure that the IP address of Network port of SETU VFX88L and IP address of your computer should be in same subnet to access Web Jeeves from your computer.
  • Page 26 Group which consist of Enabled Peer-to-Peer SIP Account. • Program the number of each FXS port in Number field of Peer-to- Peer table and assign Destination Address as the Network Port IP Address of the SETU VFX88L. Now, you can make call. B: Programming Commands Description...
  • Page 28 MATRIX COMSEC PVT. LTD. Corporate Office: 394-GIDC, Makarpura, Vadodara - 390010, India. Tel.:+91 265 2630555, Fax: +91 265 2636598 E-mail: Info@MatrixComSec.com Factory: 39-GIDC, Waghodia - 391760, Dist. Vadodara, India. Tel.: +91 2668 262056/57 Technical Support: Tel.: +91 2668 263172/73, Fax: +91 2668 262631 E-mail: Support@MatrixComSec.com...

This manual is also suitable for:

Setu vfx44l