Matrix SETU VGFX Quick Start Manual page 51

http://arttel.ru
Default = Blank
If destination number to be dialed out is an IP Address then SETU VGFX will not check Destination
Port Determination Method. Instead it will route the call using the SIP Trunk Group programmed for
IP Dialing. (Please refer 'IP Dialing' feature in the System Manual for more details)
(Refer "Routing Mechanism on FXO" feature in System Manual for more details)
To program Destination Number Determination Method for Mobile
Ports:
Click on 'Mobile Port Parameters2' link and select Destination Number
Determination Method for each Mobile Port.
• SETU VGFX supports following methods for determination of destination
number on Mobile Port.
• Destination Number Not Required
• Fixed Destination Number
• Based on Calling Number
• Manual Dial
Default = Destination Number Not Required
• If destination number determination method selected is 'Fixed Destination
Number' then program destination number for the Mobile Port in 'Fixed
Destination Number' field.
Maximum Length = 24 characters
Valid digits are 0 to 9, *, # and (.) dot
Default = Blank
Matrix SETU VGFX Quick Start 45