Table of Contents
Advertisement
http://arttel.ru
Port Parameters-SIP
Click on 'SIP Trunk Parameters 1' link and program the following parameters:
•
Port Enable?: Enable the status of the SIP Trunk. You will be able to receive
incoming calls and make outgoing calls only if the SIP Trunk is enabled.
Valid options: Yes/No
Default = No
•
SIP ID: Enter the SIP ID provided by the ITSP in this field.
Maximum Length = 40 characters
All ASCII characters allowed
Default = *
In case of Peer to Peer calls, the first SIP Trunk with SIP ID programmed as '*' will always be used
for routing the incoming call.
•
Registrar Servers' Address: Enter SIP registrar server address provided by
ITSP in this field. It can be an IP address or domain.
Maximum Length = 40 characters
All ASCII characters allowed
Default = Blank
•
Registrar Servers' Port: Enter registrar server listening port provided by ITSP
in this field.
Valid range = 1025 to 65535
Matrix SETU VGFX Quick Start
21
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGFX and is the answer not in the manual?