Configuring The Interface Language - ABB OmniCore Operating Manual

2.3.5 Configuring the interface language

Overview
The FlexPendant user interface is available in twenty languages. The default
language is English. However, it is possible to change the interface language after
logging in to the controller.
Configuring interface language after logging in to the controller
Use the following procedure to change the interface language:
Operating manual - OmniCore
3HAC065036-001 Revision: J
Note
When you switch to another language, all the buttons, menus, and dialogs will
use the new language. But the interface language of RAPID instructions, variables,
system parameters, and I/O signals is not affected.
Note
The number of interface languages that FlexPendant supports depends on the
RobotWare version the system is using.
1 On the start screen, tap Settings.
2 Tap Time & Language.
3 On the left sidebar, tap Language.
A list of supported user interface languages is displayed.
4 Tap on the desired language button.
5 Tap Apply.
The Change language confirmation window is displayed.
6 Tap Yes.
The FlexPendant is restarted and the interface language is changed to the
selected language.
© Copyright 2019-2021 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.3.5 Configuring the interface language
47