Capturing Screenshots - ABB OmniCore Operating Manual

2.4.3 Capturing screenshots

Overview
It is possible to capture the screenshot of a FlexPendant screen during operation.
This function is useful when you want to explain about a FlexPendant screen, to
report a FlexPendant issue, and so on.
Procedure
Use the following procedure to capture a FlexPendant screenshot:
Operating manual - OmniCore
3HAC065036-001 Revision: J
1 Decide on the screen that you want to capture.
2 Press and hold the Messages hard button for a longer duration (around 1
second).
A toast notification is displayed and the screenshot of the current screen is
saved to the temp folder on the controller disk.
Note
Use the File Transfer function in RobotStudio to access the image. The name of
the file is in the format FlexPendantScreen_yyyy-MM-dd_HH-MM-ss-ms.png.
Note
For information regarding the FlexPendant hard buttons, see FlexPendant
parts on page 17.
© Copyright 2019-2021 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.4.3 Capturing screenshots
Main
55