Locking And Unlocking Operating Modes - ABB OmniCore Operating Manual

3.3 Locking and unlocking operating modes

Introduction
It is possible to restrict an unauthorized change in operating mode by locking it.
This is done by configuring a temporary or permanent PIN-code.
xx2100000749
If a permanent PIN-code is not configured, the option for configuring a temporary
PIN-code is automatically enabled. While an operator can configure a temporary
PIN-code, the permanent PIN-code is configured by the user with the Key-less
mode selector grant.
Configuring a temporary PIN-code
Use the following procedure to configure a temporary PIN-code:
Operating manual - OmniCore
3HAC065036-001 Revision: J
1 On the FlexPendant status bar, tap the QuickSet button.
The Control Panel window is displayed.
2 Tap the Lock button.
© Copyright 2019-2021 ABB. All rights reserved.
3 OmniCore controller operating modes
3.3 Locking and unlocking operating modes
Continues on next page
65