Adapting The Flexpendant For Left-Handed Users - ABB OmniCore Operating Manual

2.3.8 Adapting the FlexPendant for left-handed users

Overview
Left-handed users, normally prefers their left-hand for the touch screen. The
FlexPendant can easily be adapted to suit the needs of the left-handed users. They
can easily rotate the screen through 180 degrees and use their right-hand to support
the device.
Rotating the FlexPendant screen
Use the following procedure to adapt the FlexPendant to suit a left-handed user.
What is affected?
The following settings are affected when adapting the FlexPendant for a left- handed
user.
Setting
Jogging directions
Hardware buttons and pro-
grammable keys
Emergency stop
Three-position enabling
device
Operating manual - OmniCore
3HAC065036-001 Revision: J
1 On the FlexPendant, tap QuickSet and select the Logout/Restart tab.
2 In the Screen orientation section, tap the Rotate 180° button.
The FlexPendant screen is rotated by 180 degrees and is adapted for the
left hand users.
© Copyright 2019-2021 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.3.8 Adapting the FlexPendant for left-handed users
Effect
The joystick directions are
adjusted automatically.
No effect.
No effect.
No effect
Information
The illustrations of jogging
directions in the jogging menu
are adjusted automatically.
See the details of hard but-
tons in the illustration Hard
buttons on page 19.
Differently located, at the bot-
tom instead of at the top.
51