Update Flexpendant - ABB OmniCore Operating Manual

10 Install, update, restart, and other configuration

10.8 Update FlexPendant

10.8 Update FlexPendant
Updating the FlexPendant applications
If the installed system has updates for the FlexPendant applications, you can
update it.
Updating the FlexPendant applications from settings
Use the following procedure to update the applications from settings:
Continues on next page
256
1 On the start screen, tap Settings, and then select Update from the menu.
2 If there are updates, a file is displayed in the Available Updates section.
xx2000002046
3 Tap Update All.
The applications are updated and the FlexPendant is restarted.
© Copyright 2019-2021 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: J