10 Install, update, restart, and other configuration
10.11 System diagnostics
10.11 System diagnostics
Overview
The system diagnostics feature is used to gather the current state of the system
and store on the controller as a file.
Procedure
Use the following procedure to gather the current state of the system:
260
1 On the start screen, tap Settings, and then Backup & Recovery.
2 On the left sidebar tap System diagnostics.
The System diagnostics page is displayed.
3 If required, in the File Name field edit the name of the file.
4 To change the storage path, in the Location field tap Browse and select the
required path.
5 Tap Save.
The file is saved in the selected location.
© Copyright 2019-2021 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: J