Connection Log - ABB OmniCore Operating Manual

10 Install, update, restart, and other configuration

10.9 Connection log

10.9 Connection log
Overview
This option is used to save the current connection state of the connectivity module.
Procedure
Use the following procedure to save the current connection state of the connectivity
module:
258
Note
Connection log is available only for Connected Services Gateway 3G and Wi-Fi
but not for Wired.
1 On the start screen, tap Settings, and then Backup & Recovery.
2 On the left sidebar tap Connection log.
The View Connection log page is displayed with the connection logs available
on a window.
Note
Tap on the refresh button to view the updated log.
3 Tap Export.
The Save Connection log page is displayed.
4 If required, in the File Name field edit the name of the file.
5 To change the storage path, in the Location field tap Browse and select the
required path.
6 Tap Save.
The current connection state of the connectivity module is saved in the
selected location.
© Copyright 2019-2021 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: J