Logging On And Off - ABB OmniCore Operating Manual

2.4.7 Logging on and off

Login procedure
Use the following procedure to log on to the controller, using the User Authorization
System (UAS). For more details about User Authorization System, see Operating
manual - RobotStudio.
xx2000000931
Operating manual - OmniCore
3HAC065036-001 Revision: J
1 Tap on the Username field.
The soft keyboard is displayed.
Note
If you select the Use credentials for Default User checkbox then no
password is required, and you are logged on automatically.
2 Type a valid username using the soft keyboard.
3 Tap on the Password field and type password for the selected user using
the soft keyboard.
4 Tap Log in.
The selected user is logged in.
Note
After a log off, the Log in to controller window is displayed.
© Copyright 2019-2021 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.4.7 Logging on and off
Continues on next page
59