Configuring The Interface Language - ABB OmniCore Operating Manual

2.3.1.4 Configuring the interface language

Overview
The FlexPendant user interface supports English and Chinese languages. The
default language is English.
Changing language
Use the following procedure to change the interface language on the FlexPendant.
Operating manual - OmniCore
3HAC065036-001 Revision: D
Note
When you switch to another language, all the buttons, menus, and dialogs will
use the new language. RAPID instructions, variables, system parameters, and
I/O signals are not affected.
1 On the start screen, tap Settings.
2 Tap Time & Language.
3 On the left sidebar tap Language.
4 Tap on the desired language button.
5 Tap Apply.
6 Tap OK.
The FlexPendant is restarted and the language of the user interface is
changed.
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.3.1.4 Configuring the interface language
37