Deleting A Tool - ABB OmniCore Operating Manual

6 Programming and testing

6.6.7 Deleting a tool

6.6.7 Deleting a tool
Deleting a tool
Use the following procedure to delete a tool:
148
1 On the start screen, tap Calibrate, and then select Tool from the menu.
2 Tap Delete on the context menu for the tool that you want to delete.
3 The Confirm deletion of data message is displayed.
4 Tap Delete.
The selected tool is deleted.
CAUTION
A deleted tool, work object or payload cannot be recovered, and all related data
will be lost. If the tool, work object or payload is referenced by any program,
those programs cannot run without changes.
If you delete a tool you cannot continue the program from the current position.
© Copyright 2019-2021 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: J