Overview Of This Manual - ABB OmniCore Operating Manual

Overview of this manual

About this manual
This manual contains instructions for operation of OmniCore controller based
robots.
Usage
This manual should be used during operation.
Some actions that are more advanced, or not used in the daily operation, are
described in Operating manual - Integrator's guide OmniCore.
Who should read this manual?
This manual is intended for:
Prerequisites
The reader should:
Operating manual - OmniCore
3HAC065036-001 Revision: J
Note
It is the responsibility of the integrator to conduct a risk assessment of the final
application.
It is the responsibility of the integrator to provide safety and user guides for the
robot system.
Note
Screenshots in this manual are generally intended to show a language version
corresponding to the language of the manual. In some cases, a translated manual
still uses English screenshots if the localized user interface was not available at
the time of publishing the manual.
Note
Before any work on or with the robot is performed, the safety information in the
product manual for the controller and manipulator must be read.
• operators
• product technicians
• service technicians
• robot programmers
• Have read and understood the safety instructions in the product manuals for
the robot.
• Be trained in robot operation.
© Copyright 2019-2021 ABB. All rights reserved.
Overview of this manual
Continues on next page
9