Changing Between The Eyepiece Light Path And The Camera Light Path; Placing A Sample On The Stand; Placing A Sample - Olympus BXFM Instructions Manual

3-4 Changing between the eyepiece light path and the camera light path

3-5 Placing a sample on the stand

a
18
You can select the light path for observing with the eyepiece or the
light path for observing with the display, etc. through the camera.
1
1
Slide the light path selection lever of the trinocular tube to select the
light path.
Trinocular tube
U-TR30-2
U-SWTR-3
U-TR30IR
U-TTR-2
U-ETR-4
U-SWETR
U-SWETTR-5
1

Placing a sample

1
Place the sample on the stage plate a before observation.
When using the stand (U-ST), hold the sample with the specimen
holder b as needed.
If the sample is not flat and/or parallel, the reflected light
TIP
does not return to the objective and you cannot perform the
b
observation.
Light path selection lever position
Pressed in Middle
Eyepiece 20%
Eyepiece 100%
Camera 80%
Eyepiece 0%
Eyepiece 100% Camera 0%
(Shutter)
Eyepiece 50%
Eyepiece 100% Camera 100%
Camera 50%
Eyepiece 100%
Eyepiece 100%
Pulled out
Camera 100%
Camera 100%
Camera 100%
Eyepiece 20%
Camera 80%