Setting The [Relays]; Setting Relay 1 - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Setting the [Relays]

13 Setting the [Relays]
User qualification: trained user, see
n
Continuous display ➨
Settings for [Channel 2]
In its 2-channel version, the controller has two measurement channels. This descrip‐
tion for [Channel 1] applies correspondingly for the settings in [Channel 2]. The pro‐
cedure for making the settings for the channel in question is identical, however the
parameters to be set may be different. Differences are pointed out and are also
described.
Relay
Relay 1
Relay 2
Alarm relay
Relay timer
Fig. 92: Setting the [Relays]
Setting [Relay 1], [Relay 2], [Alarm relay] or [Relay timer]
Only the process for [Relay 1] is described. The setting process for [Relay 2], the
[Relay timer] or the [Alarm relay] is the same as when setting [Relay 1].
128
Ä Chapter 4.4 'Users' qualifications' on page 21
[Relays] ➨
➨ or
[Relays]
Limit value 1
Off
Off
Off
6.1
A1069