Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
3.1.2
System configuration in V850E2, V850E1, or V850ES environment
The system configuration when using the V850E2, V850E1, or V850ES is shown below. The components used for
connection can be selected to suit the features of the system being used.
KEL
adater
KEL connector
Figure 3-2. System Configuration When Using V850E2, V850E1, or V850ES
Common parts
• Host machine: For software tool operation
• USB cable: Connects the host machine to QB-V850MINIL or QB-V850MINI main unit.
• QB-V850MINIL or QB-V850MINI main unit: On-chip debug emulator main unit.
• OCD cable: Connects QB-V850MINIL or QB-V850MINI to the target system.
Connection parts
• KEL adapter: Used to connect the OCD cable to a KEL connector.
Included with the QB-V850MINI but not with the QB-V850MINIL.
• KEL connector: Standard connector for V850E2, V850E1, or V850ES. Sold separately.
Included with the QB-V850MINI but not with the QB-V850MINIL.
• 20-pin general-purpose connector: A 20-pin male connector with a pitch of 2.54 mm. Sold separately.
• Mictor adapter: Used to connect the OCD cable to a Mictor connector. Sold separately.
• Mictor connector: A connector that supports a high-speed interface. Sold separately.
A debugging tool with tracing capability sold by an Renesas Electronics partner company can also
be connected to this connector.
• SICA adapter: Used to connect the OCD cable to an SICA connector. Sold separately.
• SICA connector: A small, space-saving connector. Sold separately.
R20UT0221EJ0400 Rev.4.00
2013.08.30
OCD cable
20-pin
general-purpose
connector
QB-V850MINIL/
USB cable
QB-V850MINI main unit
Mictor
adapter
Mictor connector
3. On-Chip Debugging
Host machine
SICA
adapter
SICA connector
Page 28 of 86
Advertisement
Table of Contents
