QB-V850MINIL, QB-V850MINI Emulator
4.3.6
Connection and startup of system
Connect and start the system in the following order.
Connecting QB-V850MINIL or QB-V850MINI to target system
(1)
Connect QB-V850MINIL or QB-V850MINI to the target system using the exchange adapter and target connector.
Refer to the system configuration diagrams shown in Figures 4-1 and 4-2 for the connection of other optional
products.
Caution Perform connection while the power to the target system is off.
Figure 4-5. Connecting QB-V850MINIL or QB-V850MINI to Target System
Connecting QB-V850MINIL or QB-V850MINI to host machine
(2)
Connect QB-V850MINIL or QB-V850MINI to the host machine using the USB interface cable. After
performing this connection, confirm that the POWER LED on QB-V850MINIL or QB-V850MINI is lit.
Caution Perform connection while the power to the target system is off.
Figure 4-6. Connecting QB-V850MINIL or QB-V850MINI to Host Machine
R20UT0221EJ0400 Rev.4.00
2013.08.30
Target system
Target system
4. Debugging with In-Circuit method
Page 66 of 86