Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
3.2.3
Connection and startup of system
Connect and start the system in the following order.
Connecting QB-V850MINIL or QB-V850MINI to target system
（1）
Connect QB-V850MINIL or QB-V850MINI to the target system using the adapter and target connector. Refer to
the system configuration diagrams shown in Figure 3-1 and Figure 3-2 for the adapter and target connector to be
used.
Caution Perform connection while the power to the target system is off.
Figure 3-3. Connecting QB-V850MINIL or QB-V850MINI to Target System
Connecting QB-V850MINIL or QB-V850MINI to host machine
（2）
Connect QB-V850MINIL or QB-V850MINI to the host machine using a USB interface cable. After performing
this connection, confirm that the POWER LED on QB-V850MINIL or QB-V850MINI is lit.
Caution Perform connection while the power to the target system is off.
Figure 3-4. Connecting QB-V850MINIL or QB-V850MINI to Host Machine
R20UT0221EJ0400 Rev.4.00
2013.08.30
Target system
3. On-Chip Debugging
Page 31 of 86
Advertisement
Table of Contents
