Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
1.3.2
On-chip debugging with in-circuit method
For the following devices, on-chip debugging with the in-circuit method is possible by using QB-V850MINIL or
QB-V850MINI in combination with V850MINI self-check board or debug adapter (separately available). V850MINIL
self-check board is not supported to this method.
Be sure to use the latest software tools such as debuggers and device files.
V850ES/KE1, V850ES/KF1
V850ES/KG1, V850ES/KJ1
V850ES/KE1+, V850ES/KF1+
V850ES/KG1+, V850ES/KJ1+
V850ES/KE2, V850ES/KF2
V850ES/KG2, V850ES/KJ2
Notes
1. Note that the P00 pin outputs a low level during reset. Should this cause a problem, the problem can be avoided by using the
QB-V850ESKX1-DA (separately available).
2. The following operations differ from those of the device.
•
The P00 pin outputs a low level during reset.
•
The subclock cannot be selected as the count clock for timer H1. If the subclock is specified as the count clock for
timer H1 using TMHMD1 register, the operation is not guaranteed.
R20UT0221EJ0400 Rev.4.00
2013.08.30
Supported Device
Debug Adapter
QB-V850ESKX1-DA
or V850MINI self-check board
QB-V850ESKX1H-DA
or V850MINI self-check board
Note 2
QB-V850ESKX1H-DA
or V850MINI self-check board
1. Outline
Note 1
Note 2
Page 19 of 86
Advertisement
Table of Contents
