Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
3.6.1
KEL connector (for V850E2, V850E1, or V850ES)
A KEL connector is a target connector included with the QB-V850MINI but not with the QB-V850MINIL.
Note that the KEL connector cannot be used when using the V850E2S or V850E2M.
When using the KEL connector as the target connector for OCD, mount either of the following connectors on the target
system.
• 8830E-026-170S: 26-pin straight type (included with QB-V850MINI)
• 8830E-026-170L: 26-pin right-angle type (sold separately)
Remark
8830E-026-170S and 8830E-026-170L are products of KEL Corporation. A conversion adapter is included
with the QB-V850MINI.
Figure 3-17 and Table 3-5 show the pin assignment and the pin functions of the KEL connector, respectively.
Input/output is indicated as seen from the target device.
R20UT0221EJ0400 Rev.4.00
2013.08.30
Figure 3-17. KEL Connector Pin Assignment Diagram
3. On-Chip Debugging
Target system
Target system
Page 45 of 86
Advertisement
Table of Contents
