Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
2.2
Self-Check Board
The part names and functions of the self-check board are described below.
The self-check board included with the QB-V850MINI differs from the self-check board included with the
QB-V850MINIL.
For details, see the following sections.
• Self-check board included with QB-V850MINI: See 2.2.1 QB-V850MINI self-check board.
• Self-check board included with QB-V850MINIL: See 2.2.2 QB-V850MINIL self-check board.
2.2.1
V850MINI self-check board
(1) NWIRE1
A connector used for connecting QB-V850MINIL or QB-V850MINI (HIF3FC-20PA-2.54DSA: made by Hirose
Electric Co., Ltd).
(2) FW1
A connector used for connecting the flash memory programmer.
(3) SW1
A switch used to set connection or disconnection of the target system.
For in-circuit debugging:
For self-testing:
Refer to 4.3.4 Switch settings for details on the settings.
(4) OSC1
A resonator board for the ceramic resonator that is used for the main clock. An 8 MHz resonator is mounted in a
socket at shipment.
Refer to 4.3.3 Clock settings when changing the main clock frequency.
(5) OSC2
A resonator for the subclock. A 32.768 kHz resonator is mounted at shipment.
The frequency cannot be changed.
R20UT0221EJ0400 Rev.4.00
2013.08.30
Figure 2-2. Part Names of V850MINI Self-Check Board
Set to "Adapter".
Set to "Self Check". (Default setting)
2. Names and functions of hardware
Page 24 of 86
Advertisement
Table of Contents
