Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
4.3.4
Switch settings
For the V850MINI self-check board, two types of mode can be selected by setting SW1.
Set SW1 to "Adapter" when performing emulation with the in-circuit method to set the adapter mode.
SW1 Setting
<R>
Adapter
Self Check
R20UT0221EJ0400 Rev.4.00
2013.08.30
Table 4-2. SW1 Setting (Self-Check Board)
Mode
Adapter mode
A setting to set the mode for performing debugging with in-circuit method.
Self-check mode
This is the default setting of SW1. A setting to set the mode for performing
self-testing.
This setting is also used to set the mode for writing to the
on the V850MINI self-check board using a flash memory programmer.
This mode is used to erase the on-chip flash memory when the debugger
cannot be activated because the user has skipped setting of the security ID
code.
4. Debugging with In-Circuit method
Description
µ
PD70F3318YGJ
Page 64 of 86
Advertisement
Table of Contents
