Table of Contents
Advertisement
QB-V850MINIL, QB-V850MINI Emulator
4.2.2
System configuration when using optional products
The figure shown below illustrates the system configuration when using optional products. The items enclosed by
dotted lines are the optional products. Applications of the optional products are described on this page. Refer to
4.2.3 List of optional product names for the corresponding product names.
<1>
<1> Host machine:
<2> USB (accessory)
<3> QB-V850MINIL or QB-V850MINI (this product)
<4> OCD cable (accessory)
<5> V850MINI Self-check board (accessory) (included with the QB-V850MINI) or QB-V850ESKX1H-DA
<6> Check pin adapter (sold separately): An adapter used for monitoring waveforms with an oscilloscope, etc.
<7> Coaxial type extension probe (sold separately):
<8> Exchange adapter (sold separately)
<9> Space adapter (sold separately):
<10> Mount adapter (sold separately):
<11> Target connector (sold separately):
R20UT0221EJ0400 Rev.4.00
2013.08.30
<2>
Device
<10>
Figure 4-2. System Configuration with Optional Products
With USB ports
An adapter used to adjust the height.
An adapter used to mount the device in the socket.
A connector mounted on the target system.
4. Debugging with In-Circuit method
<3>
<5>
<6>
<7>
<8>
<9>
<11>
Target system
A cable used to extend the distance between the emulator
and target system.
<4>
Page 60 of 86
Advertisement
Table of Contents
