RL78/G22 Fast Prototyping Board
7. Developing Code
Use the e
studio or CS+, both of which support the evaluation MCU (RL78/G22).
2
For the usage of the E2 emulator and E2 emulator Lite, refer to the help system or user's manual of the e
studio or CS+.
7.1
Using COM Port Debugging with the e
Figure 7-1 shows the settings of the e
Board.
[Debug hardware]: Select [COM port (RL78)].
•
[Target Device]: Select [R7F102GGE].
•
[Connection with Target Board]:
•
[COM Port]: Select the COM port number for assignment to the RL78/G22 FPB from the pull-down list.
[Reset control pin]: Select [DTR].
R20UT5121EJ0100 Rev. 1.00
Nov.16.22
2
studio
studio when it is to be connected to the RL78/G22 Fast Prototyping
2
Figure 7-1 Settings of the e
R7F102GGE
studio
2
7. Developing Code
2
Page 33 of 35