Display Field With Control Keys - Zeiss S88 Instructions For Use Manual

46

Display field with control keys

Basic mode
1
1.5
220 mm
USER
1
STORE MANUAL
MODE
G-30-1426-en
Description
The display field with control keys has been integrated in the control
panel.
The surgical microscope on the suspension system can be controlled ei-
ther manually or electronically. The software required for electronic con-
trol has been installed in the electronics box of the suspension system.
You operate this software via the display and key field which permits you
to view and re-configure the current settings.
The display and key field is structured as follows:
– Three displays (LCD) with the associated "∇" and "Δ" keys.
– A row of keys comprising the keys "MODE", "STORE" and "MANUAL"
and the yellow LED above the "MANUAL" key.
User interface
The user interface of the suspension system consists of the three displays
and the keys located beside and below them.
For the settings, a "∇" and "Δ" key pair is provided for each display.
The control functions have been combined in several modes (menu
pages). In the normal operating status, the basic mode is always dis-
played. The control functions shown in this mode vary, depending on the
surgical microscope installed.
In the basic mode for OPMI
in the illustration, for example, the following is displayed:
– the current lamp brightness in the upper display,
– optionally the working distance or total magnification in the middle dis-
play,
– the current user ID in the lower display.
Keys
Three keys and an LED are provided below the displays.
Use the "MODE", "STORE" and "MANUAL" keys to select the different
control functions (modes).
"MODE" key and "STORE" key
The "MODE" and "STORE" keys permit you to access the different modes
of the user interface. For details, please see the chapter "Operation".
S88 Floor Stand with Lifting Column
®
Vario on the suspension system as shown
Issue 9.0
Printed on 28. 01. 2009