140
Failure of lamp control
Failure of focusing system
Failure of magnetic brakes
G-30-1426-en
Operation
•
Press Manual button (1) if brightness control is no longer possible.
Note:
When the manual function has been activated, all electrical control sys-
tems are inoperative. The lamp brightness is automatically adjusted to a
fixed setting.
•
Press Manual key (1) if, for example, the focusing system always
moves into its upper or lower end position.
•
Focus by moving the suspension arm of the ceiling mount (floor stand)
up or down.
If the magnetic brakes fail (magnetic brakes are locked), you can manu-
ally position the articulated arm including the microscope by overcoming
the locking effect of the magnetic brakes.
S88 Floor Stand with Lifting Column
Issue 9.0
Printed on 28. 01. 2009