Zeiss S88 Instructions For Use Manual page 107

Configuration
mode 1
SETTINGS 1
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO
HAND
GRIP:
LIGHT
STORE MANUAL
MODE
C D
Configuration
mode 1
SETTINGS 1
FOOT
LEFT C:
PHOTO
FOOT
RIGHT D:
PHOTO
HAND
GRIP:
LIGHT
STORE MANUAL
MODE
G-30-1426-en
Operation
Configuration mode 1 for OPMI Vario (SETTINGS 1)
Configuration mode 1 for the OPMI Vario permits you:
– to assign a function to buttons C and D of the foot control panel,
menu items "FOOT LEFT C:" and "FOOT RIGHT D:"
– to assign a function to the freely configurable handgrip buttons, menu
item "HANDGRIP:"
Path: After you have switched on the instrument, the basic mode is auto-
matically displayed.
To access configuration mode 1 from the basic mode, simultane-
ously press the "MODE" and "STORE" keys.
Assigning a function to foot control panel buttons C and D (OPMI Vario)
Buttons C and D of the foot control panel can be configured as required.
The menu items "FOOT LEFT C:" and "FOOT RIGHT D:" permit you to
assign one of the following functions to buttons C and D:
Display Function of button C or D of the foot control panel
XY-RES XY recentering ("RESET")
FOC- Focus memory pressed for < 2 sec:
MEM
ZOOM- Zoom memory pressed for < 2 sec:
MEM
PHOTO Triggering an exposure via the camera interface, i.e. triggers
the shutter of a connected 35 mm camera.
AUX Triggering an AUX signal via the AUX interface, e.g. to
switch an external instrument on or off (see remote control
socket on the connector panel of the suspension system).
AF Triggering the autofocus option
FOOT LEFT C:
Use the upper display and key field (FOOT LEFT C:) to assign one of the
possible functions to button C of the foot control panel.
FOOT RIGHT D:
Use the middle display and key field (FOOT RIGHT D:) to assign one of
the possible functions to button D of the foot control panel.
S88 Floor Stand with Lifting Column
triggers positioning
pressed for > 2 sec: saves position
triggers positioning
pressed for > 2 sec: saves position
Printed on 28. 01. 2009
107
Issue 9.0