S8 Floor Stand With Lifting Column; Intended Use - Zeiss S88 Instructions For Use Manual

S8 floor stand with lifting column

Intended use

G-30-1426-en
Description
The floor stand is a carrier system for Zeiss surgical microscopes for al-
most all surgical disciplines. It is used to power and control the motorized
functions of a surgical microscope. The hallmarks of the floor stand are its
superb mobility and easy operation. A motorized lifting column permits the
viewing height to be perfectly matched to the surgeon's requirements.
Four steerable casters on the stand base permit easy positioning in the
operating area. The motorized functions of the surgical microscope can
be controlled using a foot control panel or hand control panel.
Further useful functions include for example:
– the magnetic coupling for almost effortless positioning,
– fully automatic change of the halogen lamp,
– brightness control via the foot control panel,
– resetting the X-Y coupling, focus and zoom,
– user-defined basic settings for a maximum of nine users:
– Lamp brightness
– speeds for focus, zoom and X-Y coupling
– and configurable keys at the foot control panel for focus memory,
XY-inversion, camera triggering, swing in/out of SDI, triggering the
AUX signal.
Warning!
The suspension system with xenon illumination must not be used for oph-
thalmic procedures.
S88 Floor Stand with Lifting Column
35
Issue 9.0
Printed on 28. 01. 2009