Zeiss S88 Instructions For Use Manual page 131

G-30-1426-en
Operation
Control functions for the OPMI
The control functions for the OPMI
3 modes:
Basic mode
– Set the lamp brightness
– Set user ID
Configuration mode 1
– allocate a function to key C of
the foot control panel
– allocate a function to key C of
the foot control panel
The various control functions are explained below.
"STORE" key
The "STORE" key alone has no function in any of the modes for OPMI
PRO magis on the suspension system.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
S88 Floor Stand with Lifting Column
®
PRO magis
®
PRO magis have been combined in
Speed mode
– Default speed for focusing
– Default speed for the zoom
function
– Default speed for the X-Y cou-
pling
Printed on 28. 01. 2009
131
®
Issue 9.0