Problem
Focused image in surgical
microscope, but unfocused
video image on monitor.
Focusing cannot be acti-
vated
G-30-1426-en
Maintenance / Further information
Possible cause
Focusing of video camera
has not been matched to fo-
cusing of surgical micro-
scope.
Different function assigned
to handgrip button 1 or 2.
Different function assigned
to button C or D of foot con-
trol panel (on foot control
panel with 8 or 14 func-
tions).
S88 Floor Stand with Lifting Column
Remedy
•
Focus the microscope
image, then the video
image.
•
Activate
configuration
mode 1 and assign the
AF (Autofocus) function
to handgrip button 1 or 2.
•
Activate
configuration
mode 1 and assign the
AF (Autofocus) function
to foot control panel but-
ton C or D.
Printed on 28. 01. 2009
147
See
-
page 108
page 107
Issue 9.0