Zeiss S88 Instructions For Use Manual page 120

120
Basic mode
0.7
USER
1
MODE STORE MANUAL
G-30-1426-en
Operation
®
OPMI VISU 150 / 200: setting the brightness as required
This function permits you to adjust the brightness.
In the basic mode, the currently set brightness of the illumination is shown
in the upper display field.
The middle display field remains empty and the relevant keys "− " and "Δ"
have no function.
If the suspension system is equipped with a second halogen lamp
housing, the currently set brightness of the second lamp is displayed in
the middle display field.
Path: The basic mode is automatically displayed after the instrument has
been switched on.
Making the settings
Keys "∇" and "Δ" allow you to change the lamp brightness.
The brightness can be varied in a range from 0.1 to 1.5 in steps of 0.1. A
beep sounds when brightness level 1.0 has been reached. Level 1.0 cor-
responds to 500 mW/cm
Acoustic signals in OPMI
A beep is emitted during brightness adjustment, when level 1.0 has been
reached.
Saving the settings
As soon as you have made a setting, the setting is accepted and saved
under the current user number.
Exception: the brightness setting cannot be saved. It is reset to level 0.1
at the next power-on of the system.
S88 Floor Stand with Lifting Column
2
sr, see the upcoming ISO standard.
(®)
VISU
Issue 9.0
Printed on 28. 01. 2009