Zeiss S88 Instructions For Use Manual page 138

138
G-30-1426-en
Operation
• Pull out the lamp module as far as it will go.
• Turn knob (1) through 180° until it snaps in. This swings the second
xenon lamp (backup lamp) into the beam path.
• Push the lamp module all the way back into the lamp housing.
• Reset the service hour counter to "0". Use a pointed object and press
it into the recess of reset button (3).
• Turn the suspension system back on at the power switch.
Note:
If the first lamp has failed and the backup lamp is in use (red segment in
knob (1) lights up), make sure to have a backup lamp module ready at
hand as a precaution.
S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009