Fig. 5 Feeding The Connecting Cable And Inserting The Usb Control - Zeiss IOLMaster 500 Manual

1 USB control
2 Connecting cable
3 Holding clips
Fig. 5 Feeding the connecting cable and inserting the USB control
• Now feed the connecting cable (2, Fig. 5) of the Option Reference Image
to the center of the head rest.

To avoid damage to the cable, pull the IOLMaster 500 back from
the head rest as far as it will go (from physician's viewpoint to the
left and to the front).
The cable between the Option Reference Image and the head rest
should not be pulled tight.
• Using the supplied holding clips (3, Fig. 5), feed the connecting cable on
the side facing the physician from the head rest to the right foot of the
head rest (from physician's viewpoint), as shown in Fig. 5.
• Remove the protecting cap (8, Fig. 2) from the USB control (6, Fig. 2) and
plug the USB control (1, Fig. 5) into a free USB port of the
IOLMaster 500.
Installation of hardware components
000000-1865-713-GA-en-US-080622
15