New Program; Saving A New Program - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
4 Operation

4.16 New program

4.16 New program
If, in the parameter menu, a new parameter setting has been produced by changing
the settings of an existing program this can be saved as a new program.
See also: 4.14 Changing a program setting, Page 61

4.16.1 Saving a new program

After the Save as key is pressed, the input mask with an input field appears on the
touchscreen.
Characters can be entered by pressing the number and letter keys and pressing the
SPACE bar generates a space.
The arrow key moves the input cursor one character to the left and deletes the
character present there.
Note
The program name is limited to 18 characters.
The previously selected handpiece code is automatically added to the program
name after the OK key is pressed.
Pressing the OK key saves the new program under the name entered. The program
selection menu appears; the new program has been included in the selection list.
64/99