Instructions for use KEY Laser III 1243
|
4 Operation
4.15 Handpiece selection
4.15 Handpiece selection
The handpiece can be selected by pressing the handpiece selection key in the pa‐
rameter menu.
Max. 6 lines can be displayed in the hand piece overview. The selection bar is moved
6 lines up/down using the keys PAGE UP / PAGE DOWN.
The keys
and
can be used to move the highlighter bar up and down, to find
the required program.
If the OK key is pressed, the selected handpiece is accepted and you return to the
parameter menu.
If the Abort key is pressed, you return to the start menu without acceptance of the
selected handpiece.
63/99