Instructions for use KEY Laser III 1243
|
4 Operation
4.7 Setting pulse energy and pulse frequency
4.7 Setting pulse energy and pulse frequency
4.7.1 Selecting pulse energy
40 to 200 mJ (in 20 mJ steps) and 250 mJ to 600 mJ (in 50 mJ steps) are avaiable.
The following combinations can be selected:
Frequency in Hz
1, 2, 3 ,4 , 6, 10
15
20
25
The chosen setting is displayed on the touchscreen (e.g.: 160 mJ).
The pulse energy levels can be regulated with the arrow keys
Alternatively, the pulse energy can also be set via the foot switch by pressing the
button.
Note
If the pulse energy is changed when the laser is in the ready mode, the KEY Laser
1243 automatically switches to the standby mode.
4.7.2 Selecting pulse frequency
Available: 1, 2, 3, 4, 6, 10, 15, 20 and 25 Hz.
Note
If the pulse energy is changed when the laser is in the ready mode, the KEY Laser
1243 automatically switches to the standby mode.
The chosen setting is displayed on the touchscreen (e.g.: 10 Hz).
The pulse frequency levels can be regulated with the arrow keys
Pulse energy in mJ
40 to 600
40 to 400
40 to 250
40 to 100
47/99
and
.
and
.