Transport And Storage - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
9 Assembly notes

9.4 Transport and storage

9.4 Transport and storage
The KEY Laser 1243 is packed in cardboard packaging.
The transport and storage information printed on the outside must be observed:
Keep upright in transit: with arrow pointing upwards.
Handle with care.
Keep dry.
Note
Once the KEY-Laser has been taken out of its packaging, the transit bracket on
the compressor, two cylinder head screws M 5x30 (Mat. no. 0.249.4187) and two
sleeves (Mat. no. 0.722.1362), needs to be removed to ensure compliance with
electrical safety.
Every time the unit is to be despatched, the compressor needs to be secured using
two cylinder head screws M 5x30 (Mat. no. 0.249.4187) and two sleeves
(Mat. no. 0.722.1362), to prevent damage.
96/99