Machine Disinfection - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
5 Care

5.2 Machine disinfection

5.2 Machine disinfection
Note
Only when the unit has been switched off.
The most important requirement is that the disinfectant is used in accordance with
the manufacturer's instructions.
Using alcohol disinfectants:
Disinfectants are available in a wide variety of different concentrations.
As a guideline, we have provided you with a list of recommended concentrations of
disinfectant ingredients as tested by us.
Note
The levels shown are maximum levels and must not be exceeded!
▪ 96% ethanol = 40g/100g disinfectant max.
▪ Propanol = 35g/100g disinfectant max.
▪ 25% glutardialdehyde = 75 mg/100g disinfectant max.
▪ Ethyltexanol = 10mg/100g disinfectant max.
▪ Formaldehyde solution = 10mg/100g disinfectant max.
▪ Glyoxal = 165mg/100g disinfectant max.
Note
KaVo accepts no responsibility if disinfectants are used with higher ingredient con‐
centrations than those specified here.
73/99