Interruption Of Ready Mode; Ending The Ready Mode - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
4 Operation 4.6 Ready mode
In Ready mode, you choose the DETECT and FEEDBACK buttons to toggle bet‐
ween modes.
See also: 4.9 Modes, Page 50
With the spray key on the foot switch or with the spray key on the touchscreen, the
spray media air and water can be changed or combined.
See also: 4.11 Spray settings, Page 55

4.6.2 Interruption of ready mode

Note
During pauses in treatment, the handpiece should be placed on the handpiece
support.
The KEY Laser 1243 automatically switches from the ready mode to the standby
mode if:
▪ no operation of a control (touchscreen, footswitch, handpiece priority logic cir‐
cuit) is performed for a period of 3 minutes.
▪ the trigger is operated while the handpiece is still in the support.

4.6.3 Ending the ready mode

The ready mode is ended by pressing the READY key again on the touchscreen or
on the foot switch.
The ready status can be ended if another key is pressed, with the exception of the
keys mentioned above.
See also: 4.6.1 Triggering laser pulses, Page 45
46/99