Energy-Saving Mode - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
4 Operation 4.4 Switch on
Now, the preset values are displayed and the unit switches to the standby mode.
Note
Never allow the laser unit to stand unattended in the switched-on state
See also: 4.19 Switch off, Page 71

4.4.1 Energy-saving mode

If no operation is performed on the KEY Laser 1243 US for a period of 5 mintues,
the unit switches to the energy-saving mode. The cooling fan is switched off and the
display changes. Readiness for operation is restored by touching the touchscreen
at any point.
43/99