Threshold Setting - KaVo Key Laser III 1243 Instructions For Use Manual

Instructions for use KEY Laser III 1243
|
4 Operation

4.10 Threshold setting

4.10 Threshold setting
For working in the feedback mode, it is first necessary to set a threshold value. This
threshold value marks the limit above which the laser pulses are output in the ready
mode when the laser pulse trigger is pressed. The output of laser pulses is stopped
below the threshold value.
The numerical display shows the currently saved threshold value.
When the Threshold value key is pressed, the threshold value menu opens.
When the arrow key is pressed, the threshold value increases by one value in each
case.
Note
Continuously touching the key changes the values consecutively.
Water and air
Note
If a minimum or maximum value is reached, two signal tones are heard.
Pressing the Abort key returns you to the start menu without changing the threshold
values.
When the OK key is pressed, you return to the start menu. Saving of the threshold
value is present on the display.
53/99