KaVo Key Laser III 1243 Instructions For Use Manual page 15

Instructions for use KEY Laser III 1243
|
2 Safety 2.2 Laser safety
Safety checks
Note
Make sure that the devices undergo regular annual safety checks and document
the results.
Information on the schedule and scope of the safety checks are in the assembly
instructions.
Requirements for correct operation
KaVo shall assume responsibility for the machine's safety, reliability and perfor‐
mance provided that:
▪ Assembly, extensions, adjustments, modifications or repairs are performed by
Service Technicians who have successfully completed the KEY Laser 1243 trai‐
ning.
▪ A laser safety officer must be appointed.
▪ The electrical installation of the relevant room meets the requirements and spe‐
cifications according to the national regulations (in Germany VDE 0100 and VDE
0107).
▪ The machine is operated in compliance with the user instructions. All servicing
must be performed in full compliance with VDE stipulation 0751.
This unit has been tested in accordance with:
▪ IEC 601-1/VDE 0750 part 1
▪ ISO 7494
▪ IEC 825-1 / VDE 0837 part 1
▪ VDE 0750 part 2-22
13/99