Table of Contents
Advertisement
INFORMATION
The cold sterilizer is ready for use within approximately an
hour, after the preparation work and the daily sterilization
check (Vacuum & Empty and Bowie & Dick test) have been
performed.
INFORMATION
The sterilizer is equipped with an energy-saving function. If a
program is not started at the latest five minutes after switching
the sterilizer on and the Preheating key is not activated, the
device automatically switches to standby. By pressing the
START/STOP key (20), the sterilizer can be operated as usual.
8.1
Requirements for operation
In order to operate the sterilizer, the following requirements must be met:
•
Device log
with important information such as installation and routine checks
(see Maintenance Manual)
•
Documented instruction of users for daily operation and maintenance
(see Chapter 4.6).
•
Operating instructions are available.
•
Type approval is available.
•
Validation was performed.
Thermo Scientific
8 Preparing for sterilization
36
50112712_082007_GB
Advertisement
Table of Contents
