Table of Contents
Advertisement
12 Program end and removal
The end of the program is signalled both acoustically and visually: the green
START/STOP key (20) will flash, and the buzzer will sound when the acoustic
signal is activated. This indicates that all phases of the sterilization cycle have
been completed. The Sterilization phase display (25) shows the indicator lights for
all completed phases. The pressure in the sterilizing chamber (9) will adjust
automatically to the outside pressure (pressure compensation).
♦ Press the green START/STOP key (20).
The acoustic signal, if activated, will be turned off. The door (1) is released. The
displays of the control panel (6) will turn off automatically after 5 minutes.
DANGER
Hot steam may escape when door (1) is opened.
Scalding hazard!
Step back when opening the sterilizer.
DANGER
You must wear heat-isolating protective gloves and long-
sleeved working clothes when opening and loading the
sterilizing chamber (9) and when removing the sterilized
articles: Watch for hot surfaces and hot steam!
♦ Rotate the door (1) to the side.
♦ Remove sterilized items.
Thermo Scientific
12 Program end and removal
68
50112712_082007_GB
Advertisement
Table of Contents
