Table of Contents
Advertisement
13 Maintenance information
DANGER
For more detailed information concerning maintenance consult
the maintenance instructions in the ring binder supplied with
the sterilizer.
DANGER
Repairs and interventions may only be carried out by our
authorized after-sales service.
DANGER
Any repairs and interventions concerning the sterilizer must be
documented in the device log.
DANGER
If the safety valve does not react to a higher pressure than the
set nominal pressure, cease using the sterilizer immediately.
Do not use it again until a new and fully functional safety valve
is installed.
DANGER
When a fault occurs and for maintenance purposes,
disconnect the steam sterilizer from the mains supply.
Pull the mains plug or neutralise the fuse.
INFORMATION
Only original seals made by the manufacturer may be used.
INFORMATION
We highly recommend you to have the sterilizer serviced
regularly by our authorized after-sales service.
We also recommend entering into a contract for maintenance
or for annual safety checks.
In Germany, pressure device repeat tests must be performed
by an expert meeting the requirements of the Pressure Vessel
Regulation, Section 32.
Thermo Scientific
13 Maintenance information
70
50112712_082007_GB
Advertisement
Table of Contents
