Auto Mode; Auto - Epson RC700 Manual

3. AUTO Mode

Switch the mode selector key switch to "Auto" to enter the AUTO mode.
The AUTO mode enables the automated operation (program execution, etc.) of the robot
system in the factory and also the status check of the robot system.
In the AUTO mode, if the safety door is open, the robot motion and program execution are
prohibited.

AUTO

AUTO
3.1 Auto
This section indicates settings in the [Auto] screen.
When starting the Controller with the mode selector key switch in "Auto", the following
screen appears at the beginning.
Auto
Key operation
Guide
F1
RC700 / RC90 option TP2 Rev.11
mode
AUTO
F1
System history
Error / Warning
Ready
Description
Displays the key operation guide.
Displays the [System History] screen.
Operation
System History
Error / Warning
...
AUTO
...............
F1
...............
3. AUTO Mode
Dialog name
Function key
Reference
103